Oracle
R12.1.1 Create Secure Enterprise Search (SES)
INSTALL_SES_ON_LINUX_S.4....
Installing Oracle E-Business Suite
Secure Enterprise Search, Release 12 [ID 462377.1]
·
Oracle Secure Enterprise
Search Release 11g (11.1.2 and 11.1.2.2)
Step:-1
[root@sujeet ~]# cat
/proc/version
Linux version 2.6.18-164.el5 (mockbuild@x86-002.build.bos.redhat.com)
(gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Tue Aug 18 15:51:54 EDT
2009
Step:-2
Memory
Requirements The memory requirements are
determined by the physical
memory
consumed by the database and by services such as the WebLogic server. The
memory
requirements for installing Oracle SES 11g Release 1 (11.1.2.2) are as follows:
? At least 2 GB of physical RAM. To determine the
physical RAM size, enter the
following
command:
[root@sujeet
~]# grep MemTotal /proc/meminfo
MemTotal: 2036792 kB
If
the size of the physical RAM is less than the required size, then you must
install
more
memory before continuing.
Step:-3
Available
RAM Swap Space Required
Between 2 GB and 8 GB >>>Equal to the size of RAM
Between 8 GB and 14 GB >>>0.75 times the
size of RAM
More
than 14 GB >>>10 GB
Step:-4
To determine whether the
system architecture can run the software, enter the
following
command:
[root@sujeet ~]# grep
"model name" /proc/cpuinfo
model name : Pentium(R) Dual-Core CPU
E5300 @ 2.60GHz
model name : Pentium(R) Dual-Core CPU
E5300 @ 2.60GHz
Step:-5
To determine the size of
the configured swap space, enter the following command:
[root@sujeet
~]# grep SwapTotal /proc/meminfo
SwapTotal:
4192956 kB
Step:-6
[root@sujeet ~]# free
total used free shared
buffers cached
Mem:
2036792 1970536 66256 0
19344 1687636
-/+ buffers/cache: 263556 1773236
Swap: 4192956 112 4192844
Step:-7
Hardware
Requirements The system must meet the
following minimum hardware
requirements:
On Linux x86:
Oracle
SES requires a minimum of 6.6 GB of disk space to install. This includes 4.9 GB
for
the software and approximately 1.7 GB for the initial Oracle SES index.
Additional
Oracle
SES requirements are based on the amount of data that you need to search.
For
example, to index 100,000 documents:
? 4 GB disk space
? 2 GB RAM
To
index 1,000,000 documents:
? 20 GB disk space
6 GB RAM
On
Linux x86-64:
Oracle SES requires a minimum of 7.6 GB of
disk space to install. This includes 6.0 GB
for
the software and approximately 1.6 GB to create the initial Oracle SES index.
Additional
Oracle SES requirements are based on the amount of data that you need to
search.
For
example, to index 100,000 documents:
? 4 GB disk
space
? 2 GB RAM
To
index 1,000,000 documents:
? 20 GB disk
space
?
6 GB RAM
Step:-8
It shows a kernel version and errata level on
the system:-
[root@sujeet
~]# uname -r
2.6.18-164.el5
Step:-9
Create user,Group
and assign group
[root@sujeet
~]# /usr/sbin/useradd -g dba oracle
This command creates the oracle user and specifies oinstall as the
primary
group. You can also include the -G option to specify
secondary
groups as follows:
[root@sujeet ~]# more /etc/oraInst.loc
inventory_loc=/10g/app/oracle/oraInventory
inst_group=dba
[root@sujeet ~]# id -a
oracle
uid=500(oracle) gid=501(dba) groups=501(dba)
[root@sujeet
~]# /usr/sbin/groupadd oinstall
If the oracle user exists,
but its primary group is not oinstall
, then enter
the
following command:-
[root@sujeet ~]# /usr/sbin/usermod -g oinstall
oracle
If
you wish, you can include the -G option to specify secondary groups:
[root@sujeet ~]# /usr/sbin/usermod -g oinstall
-G dba[,oper] oracle
[root@sujeet
~]# /usr/sbin/useradd
-g oinstall -G dba[,oper] oracle
Configure
the password of the oracle
user as follows:
[root@sujeet ~]# passwd oracle
Step:-10
The following or later
version of packages for Oracle Enterprise Linux 5.0 and Red
Hat Enterprise Linux 5.0
should be installed:
binutils-2.17.50.0.6
compat-libstdc++-33-3.2.3
compat-libstdc++-33-3.2.3 (32 bit)
elfutils-libelf-0.125
elfutils-libelf-devel-0.125
gcc-4.1.1
gcc-c++-4.1.1
glibc-2.5-12
glibc-2.5-12 (32 bit)
glibc-common-2.5
glibc-devel-2.5
glibc-devel-2.5-12 (32 bit)
libaio-0.3.106
libaio-0.3.106 (32 bit)
libaio-devel-0.3.106
libgcc-4.1.1
libgcc-4.1.1 (32 bit)
libstdc++-4.1.1
libstdc++-4.1.1 (32 bit)
libstdc++-devel 4.1.1
make-3.81
numactl-devel-0.9.8.x86_64
sysstat-7.0.0
[root@sujeet
~]# rpm -q package_name
Step:-11
[root@sujeet
~]# vi /etc/sysctl.conf
fs.aio-max-nr = 1048576
fs.file-max = 65536
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048576
[root@sujeet ~]# /sbin/sysctl -p
***************************************************
[root@sujeet
~]# vi /proc/sys/kernel/sem
semmsl
>250
semmns >32000
semopm >100
semmni >128
[root@sujeet
~]# vi /proc/sys/kernel/shmall
shmall
2097152
[root@sujeet
~]# vi /proc/sys/kernel/shmmni
4096
[root@sujeet
~]# vi /proc/sys/fs/file-max
131072
[root@sujeet
~]# vi /proc/sys/net/ipv4/ip_local_port_range
1024 65000
[root@sujeet
~]# vi /proc/sys/net/core/rmem_default
262144
[root@sujeet
~]# /proc/sys/net/core/rmem_max
4194304
Parameter
Command
semmsl, semmns,
semopm, and semmni /sbin/sysctl -a | grep sem
This command displays the value of the semaphore
parameters in
the order listed.
shmall, shmmax, and
shmmni /sbin/sysctl -a | grep shm
file-max /sbin/sysctl -a | grep file-max
ip_local_port_range /sbin/sysctl -a | grep ip_local_port_range
rmem_default /sbin/sysctl -a | grep rmem_default
rmem_max /sbin/sysctl -a | grep rmem_max
wmem_default /sbin/sysctl -a | grep wmem_default
wmem_max
/sbin/sysctl -a |
grep wmem_max
aio-max-nr /sbin/sysctl -a | grep aio-max-nr
Step:-12
Setting
Shell Limits for the oracle User:-
To increase the shell limits:-
1.Add the following lines in
the /etc/security/limits.conf
file:
2.
[root@sujeet
~]# vi /etc/security/limits.conf
oracle soft
nproc 2047
oracle hard
nproc 16384
oracle soft
nofile 1024
oracle hard
nofile 65536
Step:-13
2. Add the following line to the /etc/pam.d/login file, if it does not
already exist:
[root@sujeet
~]# vi /etc/pam.d/login
session required pam_limits.so
Step:-14
Depending on the oracle user's default shell, make the following
changes to the
default shell startup file:
For
the Bourne, Bash, or Korn shell, add the following lines in the
/etc/profile
file (or the /etc/profile.local file on SUSE systems):
[root@sujeet ~]# vi
/etc/profile
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
For
the C shell, add the following lines in the /etc/csh.login file (or the
/etc/csh.login.local file on SUSE systems):
Step:-15
[root@sujeet ~]# vi /etc/csh.login
if ( $USER == "oracle" ) then
limit maxproc 16384
limit descriptors 65536
endif
Step:-16 Create dir:-
[root@sujeet
~]# mkdir ses
Step:-17 Assign
user and permission:-
[root@sujeet
~]# chown -R oracle:dba ses
[root@sujeet
~]# chmod -R 777 ses
Step:-18
[root@sujeet
~]# init 6
Step:-19 Go to SES_setup_location:-
[oracle@sujeet setup]$ cd SES/
[oracle@sujeet SES]$ ll
-rwxrwxrwx 1 oracle dba
1472974438 Feb 1 18:01
ses_11_1_2_2_0_linux32_1of2.zip
-rwxrwxrwx 1 oracle dba 820405088 Feb
1 16:54 ses_11_1_2_2_0_linux32_2of2.zip
Step:-20 Unzip
file
[oracle@sujeet SES]$
ses_11_1_2_2_0_linux32_1of2.zip
[oracle@sujeet SES]$
ses_11_1_2_2_0_linux32_2of2.zip
create a new dir. Same location
(ses_11_1_2_2_0_linux32)
Step:-21
[oracle@sujeet
SES]$ cd ses_11_1_2_2_0_linux32
[oracle@sujeet
ses_11_1_2_2_0_linux32]$ pwd
/setup/SES/ses_11_1_2_2_0_linux32
[oracle@sujeet ses_11_1_2_2_0_linux32]$ ll
total 36
drwxrwxrwx 9 oracle dba 4096 Apr 20 2011 doc
drwxrwxrwx 5 oracle dba 4096 Apr 29 2011 install
drwxrwxrwx 2 oracle dba 4096 Apr 29 2011 Patches
drwxrwxrwx 2 oracle dba 4096 Apr 29 2011 response
-rwxrwxrwx 1 oracle dba 6091 Apr 29 2011 runInstaller
drwxrwxrwx 13 oracle dba 4096
Apr 29 2011 stage
-rwxrwxrwx 1 oracle dba 4534 Apr 19 2011 welcome.html
[oracle@sujeet ses_11_1_2_2_0_linux32]$ ./runInstaller
open window>>>>>>>>>
***********************END Install
SES*************************************
Starting
and Stopping Oracle Secure Enterprise Search
The
command for starting and stopping the search engine in Oracle SES is
searchctl. The executable is located
in the $ORACLE_HOME/bin
directory:
$ORACLE_HOME/bin/searchctl
The
command syntax is as follows:-
Command Description
searchctl start Start
the Oracle SES middle tier
searchctl startall Start
the Oracle SES middle tier and the database
searchctl stop Shut
down the Oracle SES middle tier
searchctl stopall Shut
down the Oracle SES middle tier and the database
searchctl restart Restart
the Oracle SES middle tier
searchctl restartall Restart the Oracle
SES middle tier and the database
On Linux and
UNIX platforms, you must supply the Oracle SES administrative:-
password
when running searchctl
commands. If you have shut down both the
database
and the middle tier with the searchctl stopall command,
then to
successfully
start them both, run searchctl
startall . If
the Middle Tier Port is
less
than 1024, then the following commands must be run by the root user:
[oracle@sujeet
bin]$ ./searchctl stop
Enter
admin_passwd (administrative password):
oracle123
[oracle@sujeet ]$ cd /ses/oracle/seshome/bin
[oracle@sujeet
bin]$ ./searchctl startall
password
:- oracle123
[oracle@sujeet
bin]$ searchctl start/stop
[oracle@sujeet
bin]$ searchctl startall
[oracle@sujeet
bin]$ searchctl stopall
[oracle@sujeet
bin]$ searchctl restartall
http://sujeet.oracle.com:7777/search/admin/
user:-eqsys
pass:-ses12oracle
http://sujeet.oracle.com:7777/search/query/
http://sujeet.oracle.com:7777/console/login/LoginForm.jsp
user:- weblogic
pass:-oracle123
Performing Setup
Tasks:-
1.Create a Search
Administrator.
2.Enabling
Searches on Oracle E-Business Suite
#.Setting language preferences
#.Setting profile options
#.Assigning FND search Crawler responsibility to an FND user.
#.Performing personalization setup.
3.Performing Setup tasks for Oracle SES Integration.
#.Installing Oracle E-Business Suite Secure Enterprise Search.
#.Configuring search parameters for Oracle SES.
#.Performing setup tasks in Oracle SES.
*************************************
Step:-22
1.Create a Search
Administrator:-
#.Creating a User (such as sesadmin/welcome).
System
Administrator>security:User>Define>open users fom..
User name:-sesadmin
password:-sesadmin
#.Assigning the following responsibilities to the user:-
a> Application search Administrator
responsibility.(FND_SEARCH_ADMIN)
Application Search Administrator
Create responsibility:- System
Administrator>security:Responsibility>Define
b> FND Search Crawler responsibility.(FND_SEARCH_CRAWLER)
Step:23
2.Enabling
Searches on Oracle E-Business Suite
#.Setting language preferences:-
Home page>Preferences>Display preferences>American English..
Step:-24
#.Setting profile
options:-
Profile option name default value Set_value
a> FND : Search Enabling Flag N YES
b> FND : Search Engine URL N/A http://sujeet.oracle.com:7777/ http://<hostname>:<portnumber>
c> FND : Search Session Timeout Value for Quary 1200
1800
d> FND : Search Session Timeout value for Quary 1200
1800
e> FND : Search Crawl Batch Size 1000 3000
Step:-25
Application Search Administrator > Configuration
Tab:Query Proxy region>
user:-eqsys
pass:-oracle123
************************
User name:-SERVICE
password:-SERVICE
Time out:-1800
Update
Step:-26
#.Performing
personalization setup:-
Note:-Performing personalization setup to display the Enterprise Search
region on top of the Oracle E-Business Suite Home Page.
a>
login as sysadmin/sysadmin
b> Select the Functional Administrator responsibility from the
Navigator menu.
c> Slect the personalization tab and the application Catalog subtab
to open the Appliaction Catalog page.
d> In the search region enter>
/oracle/apps/fnd/search/webuiin
the document path field as the search criteria and Click GO.All document names
that match the search criteria should be display in the search result table..
e> Click the personalize page icon for the
/oracle/apps/fnd/search/webui/AppsSearchRG document name listed in the result
table to open the choose Personalization Context page.
f> Enter 'Application Home Page' (OAHOMEPAGE) in the Set function
field and click Apply
to open the personalization
Region page for your document.
g> In the personalization structure region,Select the
personalization icon for the Row
Layout field to open the personalize Row layout Page.
h> Set the rendered property to 'true' at the 'function'
Applications Home Page' level.
i> Navigate back to the Home Page after applying the personalization
change.
j> Review if the Enterprise Search region is getting rendered on the
Oracle E-Business Suite Home Page.
k> Perform a search by entering search criteria and click GO to
verify if the search result is displayed in the search result page...
Step:-7
#.Configuring
search Proxy parameters: Accessing Search Admin Page:-
a> login on to oracle E-Business Suit as search Administrator
username
(such as
sesadmin/sesadmin)
b> Select the Application Search Administrator responsibility >
Application Search Administrator link from the navigator.
Schedules Tab:-use this tab to view crawling status and manage crawling
schedules.
Configuration Tab:-Use this tab to configure search proxy parameters to
enable the integration between Oracle EBS and SES.
note:-You can also access Oracle SES Administrative page directly
through this tab.In the additional tasks section on the lower right corner of
this tab.click the SES Admin login link to get to Oracle SES login page.
c> Searchable Objects:-Use this tab to deploy searchable objects
from Oracle EBS to the SES instance that you defined in the SES End point URL
field in the Configuration tab...
step:-8
#.Performing
setup tasks in Oracle SES:-
Accessing Oracle
Secure Enterprise Search Administrative page:-
Use either of the
following two ways to access Oracle SES administrative page:-
#. Log on to the Oracle SES administrative user interface through:-
http://sujeet.oracle.com:7777/search/admin
u:-eqsys
p:-oracle123
#. Log on to the Oracle SES administrative page from the Oracle
E-Business Suit Secure Enterprise Search Administrative page.
Configuration tab > ses
Admin login > get Oracle SES login page.
Step:-9
#.Configure the
following Global setup task in Oracle SES:-
Identity
Management Setup:-
Global Settings tab > identity management Setup link (click in this
link)
And enter the following information to activate an available plug-in in
order to enable secure search.
#.Select 'oracle.search.plugin.security.ebs.EBSidentityPluginMgr' from
the available identity plug-in region and click ACTIVate.
#.In the activate identity plug-in page.enter the following parameter
values to define the selected identity plug-in settings for all authentication
and validation activities in ORACLE ses:
a> HTTP endpoint for authentication:Enter an end point URL for
Oracle E-Businees Release 12 authentication,such as
http://sujeet.oracle.com/7777/webservices/AppSearch/SecurityService.
b> User ID :- Enter the search administrator's user name that you
created earlier.
c> Password : Enter the search Administrator's login password.
d> Click FInish to return to the Global Settings page.
step:-10
Federation
trusted Entity Setup:-
#.Global Settings tab
>Federation trusted Entity link.(click on this link)
Open >Federation trusted
Entity page
#.user name:-sesadmin/welcome
#.Select the Use Entity
plug-in for authentication check box to authentication through the active
identity plug-in.
#.Click ADD.
Step:-11
Quary
Configuration Setup:-
#.Global Settings tab
>Quary Configuration link.
In the query-time
Uthorization configuration region,enetr the following parameter values to
specify the query configuration for the query-time authorization engine: Time
out threshold (milliseconds):500000
#.In the secure search Configuration region,enter the following
information in the Security Filter Configuration section to specify security
filetr related parameter values:
Authorization Timeout (milliseconds):200000
Authorization Timeout (milliseconds):500000
Step:-12
[oracle@sujeet
config]$ cd
/ses/oracle/seshome/search/webapp/config
[oracle@sujeet
config]$ vi search.properties
# configure time in milliseconds to wait for security filter
refresh task to finish during query processing
sec_filter_refresh_wait_time=2000
Step:-13
Restart
instance:-
A> Oracle SES
B> Oracle E-Business Suite instances.
Accessing Oracle
Search Modeler:-
The Search modeler login page should have followinh URL:-
http://sujeet.oracle.com:7777/modeler/faces/ModelerHome.jsp
Only user with'UMX|APPSEARCH_DEVELOPER' user role will have the search
modeler login privilege.
Step:-14
Creating
Searchable Objects:-
Note: Make sure that the
following configuration should also be performed in Oracle SES server:
1 Locate the search.properties
file in $ORACLE_HOME/search/webapp/config directory.
2 Set the security filter
refresh task wait time value: sec_filter_refresh_wait_time=20000.
3 This is the time in milliseconds to wait for
security filter refresh task to finish during
4 query processing.
5 Use the following steps to
set the parameters in Oracle SES to avoid issues related to security
6 plug-in timeout:
7 Logon to the Oracle SES
administrative user interface using
8
http://sujeet.oracle.com:777/search/admin
9 Select the Global Settings
tab from the Secure Enterprise Search page.
10Select the Query
Configuration link from the Search section.
11In the Query-time
Authorization Configuration region, enter the following parameter
12values to specify the query
configuration for the query-time authorization engine:
·
Timeout Threshold (milliseconds): 500000
13 In
the Secure Search Configuration region, enter the following information in the
Security Filter
14 Configuration
section to specify security filter related parameter values:
· Authentication
Timeout (milliseconds): 200000
15
Authorization Timeout (milliseconds): 500000
Create a search administrator with the following responsibilities:
·
Application Search Administrator responsibility
(FND_SEARCH_ADMIN)
·
FND Search Crawler responsibility
(FND_SEARCH_CRAWLER)
16Log on to Oracle
E-Business Suite with the search administrator user name and password. sesadmin/sesadmin
17
Select the Application Search Administrator
responsibility and choose Application Search Administration from the navigation
menu.
18
In the Application Search Administrator page,
select the Configuration tab.
19
Specify the following information in the SES End
Point region:
·
SES End Point URL: Enter an URL address with the
format, http://sujeet.oracle.com:777/
in this field. This value can be defined in the 'FND: Search Engine URL'
profile option.
·
SES Version: Enter an appropriate Oracle SES
version that your system will be integrated with. It should have minimum two
characters, and the first two characters should be digits, such as 10.1.8.4,
11.1.2, or 11g. Values entered here will be stored in the 'FND: Search SES
Version' profile option.
20
In the Admin Proxy region, enter the following
fields:
·
User Name: eqsys /oracle123
·
Password: use the same password for eqsys
username when you installed the SES
·
Time Out: 1200 secs
21
In the Query Proxy region, enter the following
fields:
·
User Name: an application username with the FND
Search Crawler responsibility
·
Password: use the password for the above
username
·
Time Out: 1200 secs
22
Once you change the information in the Query
Proxy region, the Oracle SES instance needs to be restarted.
23
Set the FND: Search Enabling Flag
(FND_SEARCH_ENABLED) profile option to "Y" at the site level.
24
Logon to the Oracle SES administrative user
interface using>>sesadmin/ses12oracle
http://sujeet.oracle.com:7777/search/admin/
25
Select the Global Settings tab from the Secure Enterprise
Search page to configure the following settings.
·
Select the 'Identity Management Setup' link from the System
section to set up connections between Oracle SES and an identity management
system to validate and authenticate users for secured searches.
·
Select oracle.search.plugin.security.identity.ebs.EBSIdentityPluginMgr
from the Available Identity Plug-in region and click Activate.
·
In the Activate Identity Plug-in page, enter the
following parameter values to define the selected Identity Plug-in settings for
all authentication and validation activity in Oracle SES:
·
HTTP endpoint for authentication: Enter an end
point URL for Oracle E-Business Release 12 authentication, such as http://dev1211.iwarelogic.com:8020/webservices/AppSearch/SecurityService
·
User ID: Enter the search administrator's user
name that you created earlier in Step 1.
sesadmin
·
Password: Enter the search administrator's login
password.
·
ses12oracle
·
Click Finish to return to the
Global Settings page.
·
Select the 'Federation Trusted Entities' link from the Search
section to add federation entities.
·
In the Federation Trusted Entities page, enter
the following information:
·
Entity Name: Enter the search administrator's
user name that you created earlier in Step 1. sesadmin
·
Entity Password: Enter the search
administrator's login password. ses12oracle
·
Select the Use Identity Plug-in for authentication check box
to authenticate through the active identity plug-in.
·
Click Add to return to the Global Settings page.
·
Select the 'Crawler Configuration' link from the Sources
section to ensure the crawler logging setting is appropriate.
·
In the Crawler Logging
region, ensure the crawler log file directory path including log file name
defined in the Crawler Log File Directory field is less than the supported
length of 100 characters for Oracle SES 11.1.2 or SES 11.1.2.2 integration.
·
Click Apply.
26
27Restart both Oracle SES and Oracle E-Business
Suite instances.
To ensure that the Enterprise Search region appears on top
of the Oracle E-Business Suite Home page, perform the following personalization
steps:
1
Log in to Oracle E-Business Suite with the
system administrator's user name and password. (sysadmin/sysadmin)
2
Select the Functional Administrator
responsibility from the Navigator menu.
3
Select the Personalization tab and the
Application Catalog subtab to open the Application Catalog page.
4
In the Search region, enter
'/oracle/apps/fnd/search/webui' in the Document Path field as the search
criteria and click Go. All document names that match the
search criteria should be displayed in the search result table.
5
Click the Personalize Page icon
for the '/oracle/apps/fnd/search/webui/AppsSearchRG' document name listed in
the result table to open the Choose Personalization Context page.
[oracle@dev1211 12.0.0]$ pwd
/data/R12/oracle/VIS/apps/apps_st/appl/fnd/12.0.0/
1
Enter 'Applications Home Page' (OAHOMEPAGE) in
the Set Function field and click Apply to open the
Personalization Region page for your document.
2
In the Personalization Structure region, select
the Personalize icon for the Row Layout field to open the
Personalize Row Layout page.
3
Set the rendered property to 'true' at the
'Function: Applications Home Page' level.
4
Navigate back to the Home page after applying
the personalization change.
5
Review if the Enterprise Search region is
getting rendered on the Oracle E-Business Suite Home page.
6
Perform a search by entering search criteria and
click Go to verify if the search result is displayed in the
search result page.
Oracle Secure Enterprise Search with Oracle E-Business Suite 11i
& R12 releases
What are we announcing?
We are pleased to announce the availability of Oracle
E-Business Suite Secure Enterprise Search Solutions for Oracle E-Business Suite
R11.5.10 customers. Following products are now available for customers to
download via My Oracle Support (formerly known as OracleMetaLink).
Oracle Secure Enterprise Search
(SES) is integrated with Oracle E-Business Suite applications Releases
R11.5.10, R12.0.4 onwards and R12.1.1. Please see the following matrix for
patch numbers.
E-Business Suite
ReleasePatch number11.5.10.CU2822563112.0.4738964312.1.18441410
Abstract APPSEARCH CUMMULATIVE
PATCH Update 8441410 Product Application Object Library
Release R12 Platform Generic Platform Built
Instructions
Instructions
For Applying This Patch Preparation
Tasks
The tasks in this section
can be completed without taking any Applications services or users offline.There
are no tasks to be performed in this section.Pre-install Tasks
You must shut down all
Application tier services before performing the tasks in this section.There
are no tasks to be performed in this section.Apply The PatchApply patch
This patch contains the
following unified driver file to be applied with
AutoPatch:
u8441410.drv (This is the unified driver)Post-install Tasks
You must complete the
tasks in this section before starting up Application tier services.There
are no tasks to be performed in this section.Finishing Tasks
You may complete the tasks in
this section at any time after the update, without taking any services or users
offline.There are no tasks to be performed in this section.Additional InformationThere are no
tasks to be performed in this section. Description
This patch provides E-Business Suite Release 12.1.1
(onwards) interoperability
with Oracle Secure Enterprise Search minimum version
of 10.1.8.4 and Search
Modeler minimum version of 1.2.
After applying this patch, E-Business Suite customers will
be able to
integrate with Oracle Secure Enterprise Search
and Oracle Search Modeler.
http://blogs.oracle.com/stevenChan/entry/secure_enterprise_search_11_1
Installing Oracle E-Business Suite
Secure Enterprise Search, Release 12 [ID 462377.1]
Oracle E-Business Suite Secure Enterprise Search
documentation is available as part of the Online Documentation Library on the Oracle
Technology Network:
· Oracle E-Business Suite User's Guide
·
Oracle E-Business Suite System Administrator's
Guide - Maintenance (or Oracle
Applications System Administrator's Guide - Maintenance depending on your
Oracle E-Business Suite release)
For more information on setup steps and administrative tasks,
see Administering Oracle E-Business Suite Secure Enterprise Search, Oracle
E-Business Suite System Administrator's Guide - Maintenance.
Additionally, see the following Knowledge Documents on My
Oracle Support (formerly OracleMetaLink) about Oracle E-Business Suite
Secure Enterprise Search:
· 726239.1: Oracle
E-Business Suite Secure Enterprise Search Troubleshooting Guidelines, Release
12
· 744820.1: Oracle
E-Business Suite Secure Enterprise Search Best Practices, Release 12
· 781366.1: Search
Modeler 1.1 for Oracle E-Business Suite Readme
· 1077540.1: Oracle
E-Business Suite Secure Enterprise Search, Release Notes for Release 12.1.3
· 953483.1: Oracle
E-Business Suite Secure Enterprise Search, Release Notes for Release 12.1.2
· 566097.1: Oracle
E-Business Suite Secure Enterprise Search, Release Notes for Release 12.1.1
·
740499.1: Oracle E-Business Suite Secure Enterprise Search,
Release Notes for Release 12.0.6
